锐捷RGOS锐捷系统升级操作

1、首次使用时，使用网线将设备接口（加入SVI 相应vlan）与管理设备的网口相连。先为接口 设置IP地址。

Ruijie>enable ------>进入特权模式

Ruijie#configure terminal ------>进入全局配置模式

Ruijie(config)#interface vlan 1 ------>进入vlan 1接口

Ruijie(config-if)#ip address 192.168.1.1 255.255.255.0 ------>为vlan 1接口上设置管理 ip

Ruijie(config-if)#exit ------>退回到全局配置模式

2、确认交换机及管理设备上均开启telnet登录。

3、使用SVI口管理设备或升级设备时，使用电脑 telnet登录到管理设备上。

4、确认电脑能ping通交换机，交换机也能ping通电脑

Ruijie#ping 192.168.1.2 ------>交换机ping服务器IP可通

Sending 5, 100-byte ICMP Echoes to 172.18.62.44, timeout is 2 seconds:

!!!!!

注意：电脑自带的防火墙功能要关闭，并且要退出杀毒软件，否则可能导致无法

升级成功

5、确认当前的软件版本信息

Ruijie#sh version

system software version ：（版本信息）

4、将tftp软件（tftp软件可以从网上自行下载）及新的软件版本放入同一个目录（建议是英文路径，不建议放入中文文件夹，否则可能导致无法升级成功）。开启tftp工具，将升级文件拷贝到设备上

Ruijie #copy tftp://192.168.1.2/S2900G-E_10.4(2b12)p6_R196987_install.bin

flash:/rgos.bin

Accessing tftp://192.168.1.2/S2900G-E_10.4(2b12)p6_R196987_install.bin...

System is running defragment,please wait....

Press Ctrl C to quit

...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!

Transmission finished, file length 13143392 bytes.

Verify the image .....[ok]

CURRENT PRODUCT INFORMATION :

PRODUCT ID: 0x20140061

PRODUCT DESCRIPTION: Ruijie Full Gigabit Security & Intelligence Access Switch

(S2952G-E) By Ruijie Networks

SUCCESS: UPGRADING OK..

5、重启设备后，执行 show version 命令，查看当前软件版本，确认升级成功。

Ruijie#show ver

System description: Ruijie Full Gigabit Security & Intelligence Access Switch

(S2952G-E) By Ruijie Networks

System start time : 2007-05-13 3:23:50

System uptime : 0:0:3:56

System hardware version : 1.00

System software version :RGOS 10.4(2b12)p6 Release(196987)

System BOOT version : 10.4(2b12)p6 Release(192433)

System CTRL version : 10.4(2b12)p6 Release(192433)

Device information : Device-1

Hardware version : 1.00

Software version : RGOS 10.4(2b12)p6 Release(196987)

BOOT version : 10.4(2b12)p6 Release(192433)

CTRL version : 10.4(2b12)p6 Release(192433)

Main程序的版本号为10.4(2b12)p6 Release(196987)，升级成功。